International Shipping
Click Here For Details



Facebook
Like our Facebook page and
follow us on Twitter for access
to specials and discount codes!

Twitter





Bitcoin Accepted


  Store > Shocks / Coilovers >

King Shock Parts | Bearings and Spacers
King Bearings and Spacers
 
Additional Images


Sold as a Complete Kit for One Shock
Starting At: $44.95



Availability: Usually Ships in 3 to 5 Days
Product Code: KING-BRNG

Top Cap Bearing Options

  

  

  

Add Rubber Grommets [+$6.00]

Lower Rod End Bearing Options

  

  

  

Add Rubber Grommets [+$6.00]

Sold Per Shock - For Two Shocks Order Qty. 2
**No Returns Accepted on This Item**


Qty:  
Description Compatibility Part Numbers
 

King Shock Bearings and Misalignment Spacers are a commonly replaced part as they rotate back and forth as the shock cycles with the suspension. All King shocks use spherical bearings and misalignment spacers for mounting, and there and many bearing and spacer sizes available. Bearings and spacers are sold per shock and include two bearings, four snap rings, and four misalignment spacers. Use the drop down menus above to configure your components and reference the complete details below for more information.



View our detailed King Shock Rebuild Manual



To Order the Correct Spherical Bearings you will need to measure the inner diameter of the bearing ball with the misalignment spacers removed). All spherical bearings are Teflon lined for improved wear resistance.



King P/N FK P/N Spherical Bearing Size Compatible Shocks
B1012 FKS8T 1/2" ID Spherical Bearing (Teflon Lined) PR 2.0 / AS 2.0
B1058 FKS10T 5/8" ID Spherical Bearing (Teflon Lined) PR 2.0-2.5 / RS 2.0-2.5 / AS 2.5
B1034 FKS12T 3/4" ID Spherical Bearing (Teflon Lined) RS 3.0-4.5 / OEM Kits
B1010 FKS16T 1" ID Spherical Bearing (Teflon Lined) OEM Kits

OEM = OEM Bolt-On Kits | PR = Performance Series | RS = Pure Race Series | AS = Air Shock | BS = Bump Stop
*Part markings may change depending on supplier, double check bushing measurements when ordering.



To Order the Correct Misalignment Spacers you will need to know the spherical bearing size (see above), required inner diameter to match that of the mounting bolt, and the overall width to match the spacing of your shock tabs. All misalignment spacers are made of stainless steel.



KING P/N Bearing Bolt Size (ID) x Overall Mounting Width Compatible Shocks
21017-001 1/2" 1/2" x 1-1/4" PR 2.0 / AS 2.0
21017-002 1/2" 1/2" x 1-1/2" PR 2.0 / AS 2.0
21027-001 1/2" 3/8" x 1-1/4" - Joyner Front OEM 2.0
21041-007 1/2" 3/8" x 1-1/2" - Jeep OEM 2.0
21041-004 1/2" 10mm x 1.184" - Polaris RZR Upper OEM 2.0
21041-003 1/2" 10mm x 1-1/4" - Yamaha Rhino Front OEM 2.0
21041-005 1/2" 10mm x 1.40" - Polaris RZR Lower OEM 2.0
21041-001 1/2" 12mm x 1-1/4" - Yamaha Rhino Rear Lower OEM 2.0
21041-002 1/2" 12mm x 1.57" - Yamaha Rhino Rear Upper OEM 2.0

25016-001 5/8" 1/2" x 1-1/4" PR 2.0-2.5
25016-008 5/8" 1/2" x 1-1/2" PR 2.0-2.5
25016-004 5/8" 9/16" x 1-5/8" PR 2.0-2.5
25017-001 5/8" 5/8" x 1-1/4" PR 2.0-2.5
25513-001 5/8" 1/2" x 1-1/4" - RS Rod Ends Only RS 2.5
25513-002 5/8" 1/2" x 1-1/2" - RS Rod Ends Only RS 2.5
25513-003 5/8" 5/8" x 1-1/2" - RS Rod Ends Only RS 2.5
25039-001 5/8" 3/8" x 1-1/4" - Jeep OEM 2.5
25039-001 5/8" 3/8" x 1-1/4" - Jeep OEM 2.5
25039-002 5/8" 3/8" x 1-1/2" - Jeep Rear Upper OEM 2.5
25016-007 5/8" 5/8" x 1.301" - Ford F250/350 Upper OEM 2.5
25016-011 5/8" 0.565" x 2.651" - Dodge Front OEM 2.5
25016-003 5/8" 12mm x 1-1/4" - Toyota Lower OEM 2.5
25016-017 5/8" 12mm x 1.40" - Jeep TJ Rear OEM 2.5
25016-005 5/8" 12mm x 1-1/2" - Ford F250/350 Lower OEM 2.5
25039-003 5/8" 12mm x 1.537" - Jeep Lower OEM 2.5
25016-009 5/8" 12mm x 1.555" - Tundra Rear, Jeep JK Lower OEM 2.5
25016-018 5/8" 12mm x 1.70" - Jeep TJ Rear OEM 2.5
25016-012 5/8" 14mm x 1.203" - Nissan Titan Rear OEM 2.5
25016-016 5/8" 14mm x 1.351" - Chevy 2500 Front OEM 2.5
25016-016 5/8" 14mm x 1.351" - Chevy 2500 Front OEM 2.5
25016-006 5/8" 14mm x 1.547" - Toyota Lower OEM 2.5
25016-010 5/8" 14mm x 1.667" - Dodge Rear OEM 2.5
25016-013 5/8" 14mm x 1.927" - Toyota Lower OEM 2.5
25016-015 5/8" 15mm x 1-14" - Joyner Rear OEM 2.5

30026-001 3/4" 1/2" x 1-1/2" RS 3.0+
30026-002 3/4" 5/8" x 1-1/2" RS 3.0+
30026-003 3/4" 14mm x 1-1/2" RS 3.0+
25016-014 3/4" 0.635" x 1.546" - Toyota Tundra Front OEM 2.5
25017-003 3/4" 3/4 x 1-3/4" - Nissan Patrol Rear OEM 2.5
25037-001 3/4" 3/4 x 2-1/2" - Toyota Hilux OEM 2.5

OEM = OEM Bolt-On Kits | PR = Performance Series | RS = Pure Race Series | AS = Air Shock | BS = Bump Stop
*Part markings may change depending on supplier, double check bushing measurements when ordering.



Spherical Bearing Grommets are used on piggyback reservoir shocks, bypass shocks, and steering stabilizers to keep them centered within the shock mounting tabs. They are designed to fit flush with 1.25" wide spacers. Grommets are not designed to be used as weather seals.



King P/N Grommet Size Compatible Shocks
SG101 1/2" Spherical Bearing Grommets (Blue) PR 2.0 / AS 2.0
SG102 5/8" Spherical Bearing Grommets (Blue) PR 2.0-2.5 / RS 2.0-2.5 / AS 2.5
SG103 3/4" Spherical Bearing Grommets (Blue) RS 3.0-4.5 / OEM Kits

OEM = OEM Bolt-On Kits | PR = Performance Series | RS = Pure Race Series | AS = Air Shock | BS = Bump Stop
*Part markings may change depending on supplier, double check bushing measurements when ordering.



King Shock images are ┬ęCopyright King Shock Technology, used with permission.
Additional images and product descriptions are ┬ęCopyright Filthy Motorsports, LLC.
Features
  • Direct Replacement King Parts


Share your knowledge of this product with other customers... Be the first to write a review