FilthyMotorsports.com

Warn M8000 Premium Series winches are medium duty winches with 8,000 lb. pull ratings and your choice of a 4.8 hp, 12 volt or 2.1 hp, 24 volt motor. At full load, these winches pull at a line speed of over 8 feet per minute and the automatic break, freespooling clutch, and 12 foot long remote switch make it fast, safe, and easy to use. 100 feet of 5/16" winch cable running through the provided roller fairlead gives you enough strength and reach to get a medium sized vehicle out of almost any situation.

Warn M8000 Winch Specs
The Warn M8000 winch is available in as a standard 12 volt model or in a 24 volt configuration by special order.

Configurations	Warn M8000 (12v)	Warn M8000 (24v)
Part number	Warn 26502	Warn 265032
Rated line pull	8,000 lbs. single line pull	8,000 lbs. single line pull
Intended use	Truck and SUV recovery	Truck and SUV recovery
Motor	12v 4.8 hp, series wound	24v 2.1 hp, series wound
Controls	Remote switch with 12 ft lead	Remote switch with 12 ft lead
Geartrain	3-stage planetary gears	3-stage planetary gears
Gear ratio	216:1	216:1
Clutch	Sliding ring gear	Sliding ring gear
Brake	Automatic direct drive cone	Automatic direct drive cone
Drum dimensions	2.5" x 9.0"	2.5" x 9.0"
Weight	74 lbs.	74 lbs.
Cable	100 feet of 5/16" wire rope	100 feet of 5/16" wire rope
Fairlead	Roller	Roller
Battery requirements	650 CCA	650 CCA
Battery leads	72 inches of 2 gauge wire	72 inches of 2 gauge wire
Finish	Powder coated	Powder coated
Winch dimensions	21.0" L x 6.3" D x 7.6" H	21.0" L x 6.3" D x 7.6" H
Mounting bolt pattern	Standard 10.0" x 4.5"	Standard 10.0" x 4.5"

Warn M8000 12 Volt Winch Performance Specs
Specs are based on layer one line pull and the table at the bottom lists the line pull capabilities of all cable layers.

Line Pull	Line Speed	Motor Current
0 lbs.	42.0 ft/min	80 amps
2,000 lbs.	16.0 ft/min	200 amps
4,000 lbs.	11.9 ft/min	285 amps
6,000 lbs.	9.79 ft/min	350 amps
8,000 lbs.	8.01 ft/min	435 amps
Cable Layer	Pull Capacity
Layer 1	8,000 lbs.
Layer 2	7,280 lbs.
Layer 3	6,670 lbs.
Layer 4	6,230 lbs.

Warn M8000 24 Volt Winch Performance Specs
Specs are based on layer one line pull and the table at the bottom lists the line pull capabilities of all cable layers.

Line Pull	Line Speed	Motor Current
0 lbs.	27.3 ft/min	46 amps
2,000 lbs.	17.1 ft/min	99 amps
4,000 lbs.	12.6 ft/min	145 amps
6,000 lbs.	10.3 ft/min	190 amps
8,000 lbs.	8.8 ft/min	235 amps
Cable Layer	Pull Capacity
Layer 1	8,000 lbs.
Layer 2	7,460 lbs.
Layer 3	6,980 lbs.
Layer 4	6,620 lbs.

Warn images are © Copyright Warn Industries, Inc., used with permission.
Additional images and product descriptions are © Copyright Filthy Motorsports, LLC.