FilthyMotorsports.com

Warn Power Plant Dual Force HP and HD Series winch and air compressor combos are a must have tool for contractors and outdoor enthusiasts. The 9,500 lb. rated HP model and 12,000 lb. rated HD model Power Plant winches are strong, reliable, durable and very easy to use. Heavy duty winch cable is included, and a roller fairlead and 12 foot long remote winch controller make for safe and easy operation. Like all Warn winches, they have fast zero load line speeds and freespooling clutches for quick winding and unwinding. The air compressor has a 5 cfm output at 90 psi and can inflate four 35" tall tire from 8 to 35 psi in under 8 minutes and can even operate air tools. A 1/2 gallon reservoir is built into the heavy duty housing and the integrated air intercooler makes for cooler operating temperatures. The Power Plant's compact size lets it fit in most winch bumpers and all it takes to change from a winch to an air compressor is a flip of a switch .

Click Here to watch a video if the Warn Power Plant in action.

Warn PowerPlant Winch Specs

Models	PowerPlant HP	PowerPlant HD
Part Number	Warn 71800	Warn 71801
Rated Line Pull	9,500 lbs.	12,000 lbs. single line pull
Gear ratio	156:1261:1
Weight	100 lbs.	115 lbs.
Cable	125' x 5/16"	80' x 3/8" wire rope
Fairlead	Roller
Drum dimensions	2.5" x 9.0"
Intended Use	Truck and SUV recovery
Motor	12v 4.6 hp, Gen II series wound with thermal protection
Controls	Remote switch with 12 foot lead and temp. indicator
Geartrain	3-stage planetary gears
Clutch	Sliding ring gear
Brake	Integrated direct drive cone
Battery Requirements	650 CCA
Battery leads	72 inches of 2 gauge wire
Finish	Powder coated
Winch dimensions	24.31" long x 7.0" wide x 13.46" tall
Mounting bolt pattern	10.0" x 4.5"

Warn PowerPlant Air Compressor Specs

Air reservoir	1/2 gallon with integrated air intercooler
Air flow rating	12 CFM @ 0 psi and 5 CFM at 90 psi
Max air pressure	100 psi
Air pressure switch	Yes
Air hose	12' nylon with quick disconnect
Fitting material	Brass

Warn PowerPlant HP Winch Performance Specs
This model of Warn winch has the following 12 volt DC performance specifications.
Specs are based on layer one line pull and the table at the bottom lists the line pull capabilities of all cable layers.

Line Pull	Line Speed	Motor Current
0 lbs.	26.9 feet per minute	88 amps
2,000 lbs.	14.6 feet per minute	195 amps
4,000 lbs.	10.3 feet per minute	262 amps
6,000 lbs.	7.8 feet per minute	345 amps
8,000 lbs.	6.1 feet per minute	420 amps
9,500 lbs.	5.2 feet per minute	454 amps

Cable Layer	Pull Capacity
Layer 1	9,500 lbs.
Layer 2	8,650 lbs.
Layer 3	7,920 lbs.
Layer 4	7,400 lbs.
Layer 5	6,940 lbs.

Warn PowerPlant HD Winch Performance Specs
This model of Warn winch has the following 12 volt DC performance specifications.
Specs are based on layer one line pull and the table at the bottom lists the line pull capabilities of all cable layers.

Line Pull	Line Speed	Motor Current
0 lbs.	20.5 feet per minute	89 amps
2,000 lbs.	11.7 feet per minute	153 amps
4,000 lbs.	8.6 feet per minute	207 amps
6,000 lbs.	6.7 feet per minute	265 amps
8,000 lbs.	5.4 feet per minute	318 amps
9,500 lbs.	4.4 feet per minute	370 amps
12,000 lbs.	3.6 feet per minute	416 amps

Cable Layer	Pull Capacity
Layer 1	12,000 lbs.
Layer 2	9,517 lbs.
Layer 3	7,886 lbs.
Layer 4	6,732 lbs.

Service and Repair
All Warn winches are completely serviceable, rebuildable, and repairable, and Filthy Motorsports is your source for genuine Warn replacement parts. Call or email us with your winch model and we'll send you a parts list to help you get the parts you need to make your Warn winch like new again, or if you prefer, you can bring us your winch and we'll service it for you within a few days.

Warn images are © Copyright Warn Industries, Inc., used with permission.
Additional images and product descriptions are © Copyright Filthy Motorsports, LLC.