International Shipping
Click Here For Details

Like our Facebook page and
follow us on Instagram for access
to specials and discount codes!


  Store > Brands >

Warn 9.0Rc - 9,000 lb. Winch | 71550 (Synthetic)
Warn 9.0Rc Winch
Additional Images

Availability: Currently Unavailable
Product Code: WARN-71550


Warn 9.0 Ultimate Performance Series Rock Crawling winches are rated at 9,000 lbs. and have a compact design with a spooled weight of only 54 lbs. making them the ultimate rock crawling winch. Used in competitions around the world, the Warn 9.0Rc uses a shorter drum and 50 feet of 3/8" synthetic winch rope to reduce size and weight without giving up pulling power. The 4.8 hp motor and 216:1 gearing allow for fast line speeds and the 12 foot next-gen remote allows for easy and safe operation. The winch housing is sealed from the elements and comes primed, powder coated, and undercoated for maximum corrosion resistance. A polished aluminum hawse fairlead, ballistic nylon protective sleeve, and hook thimble protect the synthetic rope cable and the super tough swivel hook allows for easy hook-up in even the most awkward situations. Simply put, this winch is the best rock crawling winch on the market today.

Warn 9.0Rc Winch Dimensions and Specifications:

Part number Warn 71550
Rated line pull 9,000 lbs. single line pull
Intended use Competition / truck and SUV recovery
Motor 12v 4.8hp series wound
Controls Remote switch with 12 foot lead
Geartrain 3-stage planetary gears
Gear ratio 216:1
Clutch Sliding ring gear
Brake Automatic direct drive cone
Drum dimensions 2.75" x 4.75"
Weight 54 lbs.
Cable 50' x 3/8" Spydura synthetic rope
Fairlead Polished aluminum hawse
Battery requirements 650 CCA
Battery leads 72 inches of 2 gauge wire
Finish Primed and powder coated
Winch dimensions 16.8" L x 6.3" D x 7.6" H
Mounting bolt pattern 6.0" x 4.5"

Warn 9.0Rc Winch Performance Specs:
This model of Warn winch has the following 12 volt DC performance specifications.
Specs are based on layer one line pull and the table at the bottom lists the line pull capabilities of all cable layers.

Line Pull Line Speed Motor Current
0 lbs. 42 feet per minute 80 amps
2,000 lbs. 16 feet per minute 200 amps
4,000 lbs. 11.9 feet per minute 285 amps
6,000 lbs. 9.79 feet per minute 350 amps
8,000 lbs. 8.01 feet per minute 435 amps
9,000 lbs. 6.4 feet per minute 465 amps

Cable Layer Pull Capacity
Layer 1 9,000 lbs.
Layer 2 7,280 lbs.
Layer 3 6,670 lbs.
Layer 4 6,230 lbs.

Warn Winch Service and Repair: All Warn winches are completely serviceable, rebuildable, and repairable, and Filthy Motorsports is your source for genuine Warn replacement parts. Call or email us with your winch model and we'll send you a parts list to help you get the parts you need to make your Warn winch like new again, or if you prefer, you can bring us your winch and we'll service it for you within a few days.

Warn images are © Copyright Warn Industries, Inc., used with permission.
Additional images and product descriptions are © Copyright Filthy Motorsports, LLC.
  • 9,000 lb. (4080 kgs) single line pull rating
  • 4.8 hp series wound motor delivers fast line speed under load
  • Next-generation control pack delivers long duty cycles
  • New-style remote control
  • 50' of 3/8" (15 m of 9.5 mm) diameter synthetic rope combined with a rugged, 360-degree swivel hook and thimble
  • Ballistic nylon sliding sleeve that provides extra rope protection against abrasion and wear
  • Exclusive multi-segment cam actuated brake for positive operator control during winching
  • Gloss red paint with primer undercoat gives superior corrosion resistance
  • Aluminum hawse fairlead

Share your knowledge of this product with other customers... Be the first to write a review