International Shipping
Click Here For Details

Like our Facebook page and
follow us on Instagram for access
to specials and discount codes!


  Store > Brands >

Warn 9.5xp - 9,500 lb. Winch | 68500 / 87310 (Synthetic)
Warn 9.5xp Winch
Additional Images

Availability: Currently Unavailable
Product Code: WARN-68500


Warn 9.5xp Extreme Performance Series winches are designed and built to withstand the abuses of hard core off-roading and to meet the demands of off-road racers. The 9,500 lb. pull rating is backed by Warn's strongest 6 hp, high output, parallel series wound motor and 156:1 gears that maximize torque and duty cycle time. The chip resistant, powder coated winch housing features full face contact drum seals and end housing gaskets for superior dirt, mud, and water resistance. The included 12 foot long winch controller, roller fairlead, and 100 feet of heavy duty 5/16" winch cable make for easy and safe operation even in the worst off-road conditions.

Warn 9.5xp Winch Dimensions and Specifications:

Configurations Warn 9.5xp Warn 9.5xp-s Synthetic
Part number Warn 68500 Warn 87310
Rated line pull 9,500 lbs. single line pull 9,500 lbs. single line pull
Intended Use Competition truck and SUV Competition truck and SUV
Motor 12v 6 hp parallel series wound 12v 6 hp parallel series wound
Controls Remote switch with 12 ft lead Remote switch with 12 ft lead
Geartrain 3-stage planetary gears 3-stage planetary gears
Gear ratio 156:1 156:1
Clutch Sliding ring gear Sliding ring gear
Brake Automatic direct drive cone Automatic direct drive cone
Drum dimensions 2.5" x 9.0" 2.5" x 9.0"
Weight 87 lbs. Not available
Cable 100' x 5/16" wire rope 100' x 3/8" Spydura
Fairlead Roller Aluminum hawse
Battery requirements 650 CCA 650 CCA
Battery leads 72 inches of 2 gauge wire 72 inches of 2 gauge wire
Finish Powder coated Powder coated
Winch dimensions 22.7" L x 6.3" D x 7.7" H 22.7" L x 6.3" D x 7.7" H
Mounting bolt pattern Standard 10.0" x 4.5" Standard 10.0" x 4.5"

Warn 9.5xp Winch Performance Specs:
This model of Warn winch has the following 12 volt DC performance specifications.
Specs are based on layer one line pull and the table at the bottom lists the line pull capabilities of all cable layers.

Line Pull Line Speed Motor Current
0 lbs. 38 feet per minute 70 amps
2,000 lbs. 16.8 feet per minute 175 amps
4,000 lbs. 12.8 feet per minute 262 amps
6,000 lbs. 10.1 feet per minute 335 amps
8,000 lbs. 8.8 feet per minute 425 amps
9,500 lbs. 7.6 feet per minute 480 amps

Cable Layer Pull Capacity
Layer 1 9,500 lbs.
Layer 2 8,650 lbs.
Layer 3 7,920 lbs.
Layer 4 7,400 lbs.
Layer 5 6,940 lbs.

Warn Winch Service and Repair: All Warn winches are completely serviceable, rebuildable, and repairable, and Filthy Motorsports is your source for genuine Warn replacement parts. Call or email us with your winch model and we'll send you a parts list to help you get the parts you need to make your Warn winch like new again, or if you prefer, you can bring us your winch and we'll service it for you within a few days.

Warn images are © Copyright Warn Industries, Inc., used with permission.
Additional images and product descriptions are © Copyright Filthy Motorsports, LLC.
  • 9,500 lb. (4,310 kgs) single line pull rating
  • High Output Parallel Series Wound winch motor is the strongest and most durable in the industry
  • Extreme Duty Winch Sealing. Enables superior water resistance
  • Exclusive Brake Design. Provides superior operator control when winching
  • Extended-duty control pack delivers long duty-cycle to help you tackle the most demanding pulls
  • 3-Stage Planetary Gear Train. Proven to be the most reliable efficient and durable design
  • Remote-mount, next-generation control box allows for various mounting options
  • Remote control with 12' (3.7m) lead
  • High gloss, chip-resistant powder coat finish. Provides superior corrosion resistance
  • Wire Rope. 100' 5/16" diameter (30m, 8mm diameter)

Share your knowledge of this product with other customers... Be the first to write a review